Today, I will talk to you about the problems that you should pay attention to during the use of non-standard equipment and the daily maintenance of non-standard equipment. Please be careful and look carefully. It is very important. If you enter the industry in the future, you will be handy. Change In other words, you are an expert in this field. Let me talk to you first about the problems you should pay attention to during the use of non-standard equipment.

　　Now that our non-standard equipment is in use, in order to ensure high-quality products, the surface height of our non-standard equipment must be kept basically the same. Only in this way can we ensure that the products made by our non-standard equipment are beautiful, and we can effectively complete our equipment. Due to the high speed of the products made by non-standard equipment, the operator can not see the hand and adjust the operation mode by hand. The reaction speed is definitely not reached. Especially now that our newly developed non-standard equipment, we have the surface with grain, the flatness is not high or there is no grain, we have the trademark environment is limited, it is important to maintain the normal height and stability of the machine. Only after these are completed, can our non-standard equipment be able to operate normally, and then the problems can be solved in time.

When non-standard equipment is made and used, our machinery and equipment sometimes walk according to the set parameters, but in the case of different materials, different thicknesses, and different automated equipment assembly methods, the height of our non-standard equipment needs to be adjusted and controlled. Only by adjusting the main performance of the equipment can we ensure the effective development of our equipment, and can we effectively solve the performance of our equipment. It is very important to maintain the equipment. I hope you can check your equipment after work every day and before work the next day. It can ensure the normal performance of non-standard equipment, but also avoid unnecessary trouble, and delay the time every day to ensure the normal operation of your equipment. If you don’t maintain our non-standard equipment from time to time, the equipment will be able to operate normally over time. It’s not only that our normal operation is so simple, that is, our equipment creates value for customers, so we must Pay attention to the maintenance of our non-standard equipment.

　　Daily maintenance of non-standard equipment

　　 1. Keep the machine clean and turn off the power when not in use.

　　 2. Avoid collision or severe vibration to the machine.

　　 3. Keep away from heat.

　　 4. Avoid storing the machine in a humid environment.

　　 Daily maintenance-after each operation

　　 1. Rinse the hose and filter connected to the cleaning agent to remove any detergent residues to help prevent corrosion.

　　 2. Turn off the water supply system connected to the high pressure washer.

　　 3. Pull the trigger on the servo gun lever to release all the pressure in the hose.

　　 4. Remove the rubber hose and high pressure hose from the high pressure washer.

　　 5. Cut off the connecting wire of the spark plug to ensure that the engine will not start (applicable to the engine type).

　　 Electric type:

　　Turn the power switch to the "on" and "off" positions four to five times, 1-3 seconds each time, to clear the water in the pump. This step will help protect the pump from damage.

　　 Engine type:

　　 Slowly pull the start cord of the engine 5 times to remove water from the pump. This step will help protect the pump from damage.

　　 Regular maintenance --- Maintenance every 2 months

　　 1. Regular removal of fuel deposits from the fuel storage tank will extend the service life and performance of the engine. Fuel deposits can cause damage to fuel lines, fuel filters and carburetor.